Yc320 Permanent Magnet Variable Frequency Intelligent Booster Pump

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 1 Year
• Model NO.: YC320
• Max.Head: 10-30m
• Max.Capacity: <50 L/min
• Driving Type: Magnetic
• Material: Stainless Steel
• Structure: Single-stage Pump
• Assembly: Booster Pump
• Power: Electric
• Start Up: Magnetic Pump
• Type: Positive-Displacement Pump
• Application: Booster Pump
• Industry: Food Pumps
• Media: Clean Water
• Performance: Automatic Pump
• Theory: Electromagnetic Pump

Product Description

Water shortage alarm

1. The electric pump idles for 10 seconds, the alarm light comes on, and the water pump stops.

The electric system runs for 3 minutes. If there is no normal water discharge, the alarm light will come on and the water pump will start and stop repeatedly.

Water leakage alarm
If the pipeline leaks, the alarm light will light up and the water pump will start and stop repeatedly.

Motor failure alarm
If the motor has a stalled rotor, overcurrent, phase loss, high or low voltage, or excessive humidity on the control board, the alarm light will light up and the water pump will stop.

Water temperature high and low alarm
1. When the water temperature exceeds 70", the alarm light turns on and the water pump automatically stops.
2. When the water temperature is lower than 4" and below, the water pump automatically starts and the alarm light flashes when the power is turned on and the idle mode is met.

Gear setting instructions
1. After the water pump is installed, open the valve and faucet to drain the water.
the air in the road;
2. Power on the water pump;
3. Press the power button to turn off the water pump and make the setting gear area display OF;
4. Observe the initial pressure displayed in the operating pressure window;
5. Press the power button again to turn on the water pump and follow the recommendations in the table below.Choose the appropriate gear;